Area:

Requires support to activate?

General settings

No

All automatic emails that go out from Extend have a header, some emails have taken their header from this page, some have not.

Nowadays all emails get their header from here if they are filled in, otherwise it will get from the old way where Extend support set up the header.

How to access it?

Kugghjulet → Övriga inställningar → Epostinställningar

Area:

Requires support to activate?

Warehouse

No

It is now possible to receive an email notification when the safety stock falls below a certain level of an entire stock.

We have now added that you can also receive a webhook at indications per product.

Indications is when the different warehouse-controllers have something to purchase.

The entered email address (or several by separating with ; or , ) will be included in the webhook when the indication is created.

The purpose is in case a specific person is interested in the stock balance of a product. Then they can receive a notice

This email info can also be entered via uploads and via API.

It is also possible to listen when a product falls below the order point via Webhooks.

How to access it?

Warehouse → Products → Edit product (Pen tool)

Area:

Requires support to activate?

Order

No

Inside the order main page, we have added another column called "Allocated"

This shows a become icon which indicates that the entire order is fully allocated to the balance in stock and needs (mostly) no action.

Some rules when the icon appears:

• On orders in "Review Queue" with allocated balance.

• If the order only contains VAS or service products.

• If order lines are picked or have already been sent.

Some rules when the icon is not displayed:

• If it is an order where any line is not allocated (For example: waiting for delivery or no purchase created).

• In the case of direct delivery, the icon is displayed after the purchase has been made if the order also contains regular stock items that are allocated and not before.

• If all lines are delivered then the order is in status "Completed".

The purpose is to be able to quickly get an overview of whether everything is in stock to deliver the order.

How to access it?

Area:

Requires support to activate?

Warehouse movement

No

In several places in the WMS, you can select a storage location by pressing.

If you have many empty storage locations, the list has become long and there is a risk that you accidentally click on a different storage location than the one you intended while scrolling on the page.

We have now made it so that you have to press the green area to select a storage location. Previously, the entire red area was active for pressure.

How to access it?

Wherever there are storage location lists.

Area:

Requires support to activate?

Order

No

After you create a multiplock, you get two choices:

• Common multiplock

• Aggregated multiplock

When you make an aggregated multiple pick, the balance may not be available at the location, or you may want to pick from a different storage location than the existing one. Then there were 7 steps earlier to be able to do this. (Marked with red arrows below).

In the new function, you get directly to the view where you can re-reserve the balance or note the remaining balance on the line. (marked with green arrows below)

How to access it?

Enabled for everyone

Area:

Requires support to activate?

Order

Yes

A few versions ago we added the possibility to show "Handling label" from the Backend in the WMS in a clearer way for the overview of a multiple pick before starting to pick.

Now we have built on that function by alerting the picker even during the actual pick, the change is made for aggregated multiple picks.

How to access it?

The setting needs to be activated by support, but if it is already active, you get the function automatically.

Area:

Requires support to activate?

Warehouse movement

No

When you have searched for a product, you sometimes want to move it immediately because it might be in the wrong place or similar.

Previously, you had to copy the pallet number and go to "Stock transfer".

Now we have made a shortcut where you can directly move the pallet

How to access it?

Main menu → Search product → Search product → Balance list → Change

Area:

Requires support to activate?

Order

No

On single pick-up, you have previously ended up at an intermediate landing place after pressing "Confirm with transport" where you then had to press "Book transport". This has been to provide the opportunity for joint transport.

Now we have changed so that you can go directly to the transport booking page by changing the button of the day when the single order pick is complete:

How to access it?

Main menu → Order picker → At the bottom of the earth when it is fully packed.

Area:

Requires support to activate?

Order

No

Under "Find identical orders" it was previously only possible to create batch picking, which required a special handling of the picking process.

Now we have added so that you can create "Multiplock" directly

This makes it possible to access all the functions we added to the order pick page

How to access it?

Main menu → Find other orders

Area:

Requires support to activate?

Webshop

No

It is now possible to add a box inside the online shop that shows the customer's available credit:

How to access it?

You have to go via Gear → Other settings → Client settings:

View available credit in Extend B2B